Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls *Input for setup mode (optional)

*Input for setup mode (optional) This mode allows the machine to be cycled during setup and troubleshooting while maintaining the current downtime reason and without incrementing the parts count

and turns Off when metal enters the sensing field

or dry contact closure to ground) for cycle

This kit is for SmartPAC 2 with a date code (serial number) 1238XXXX or higher

and Z directions Degree of protection IEC 60529 IP67

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls *Input for setup mode (optional)Wintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,